Gator
Marine Fuel Water Separator Filter Element S3213 Replacement 10 Micron
Marine Fuel Water Separator Filter Element S3213 Replacement 10 Micron
AVAILABILITY: IN STOCK
ORDER NOW, SHIPS: LOADING...
SKU: PART NO. FFE3213
Couldn't load pickup availability
Marine Fuel Filter And Water Separator Element Diesel & Unleaded
10-Micron Elements: Best for modern outboard and inboard four-stroke or two-stroke fuel-injected (EFI) gasoline & Diesel engines.
OEM Replacement Reference (For Compatibility Only)
Replaces OEM Part Numbers:
35-60494-1, S3213, B32013, 18-7932-1, 18-7932, 18-7928-1, 18-7928,
35-809097, MAR-24563-03-00, 18-7919, 18-7919-1,
18-7922-1, 18-7922, 18-7853-1
Part numbers are for reference only.
Installation Notes
• Direct replacement, no modification required
• Pre-fill clean fuel on the dirty side of the filter before installation
• Do not reuse old filter elements
• After installation, prime the fuel system and check for leaks
High Quality Filtration Media
• Made with 3-layer synthetic fibre filter media
• Efficiently filters water, iron oxide, dust and other contaminants
• Reduces wear on fuel system components
• Helps improve fuel efficiency and engine reliability
Product Features
-
Direct fit replacement, easy installation
-
Filters solid impurities and emulsified water
-
Protects fuel injectors and engine components
-
Reduces clogging and fuel system wear
-
Up to 10x reduction in hard particle penetration
-
Twice the contaminant holding capacity of standard filters
-
Over 99.6% filtration efficiency at 10 microns
Technical Details
• Filter Rating: 10 Micron
• Port Size: 3/8" NPT
• Durable powder-coated metal housing
• Suitable for marine outboard fuel systems and diesel fuel applications
Specification:
Viton Seal Orings
10 Micron Filter Cartridge
To Replace Element:
1. Loosen self-venting drain plug and drain the element into a container.
2. Remove filter element from mounting bracket with bowl connected.
3. Remove bowl from filter element and clean o-ring gland on bowl. BOWL IS REUSABLE DO NOT DISCARD.
4. Lubricate o-ring with oil or grease and install on bowl.
5. Install bowl onto new element, tighten by hand.
6. Lubricate filter top seal with oil or grease.
7. Fill filter/bowl assemble with clean fuel and attach onto mounting bracket, tighten by hand.
8. Start engine and check to ensure there are no leaks.
Share
