Skip to product information
1 of 3

Carb Parts

Adjustable HEI Vacuum Advance Canister for SBC BBC

Adjustable HEI Vacuum Advance Canister for SBC BBC

Regular price $60.00 AUD
Sale price $60.00 AUD Sale Regular price
Sold out
Shipping calculated at checkout.

AVAILABILITY: IN STOCK

ORDER NOW, SHIPS: LOADING...

SKU: PART NO. CVA2565

EMPTY DOM REMOVE PROTECTOR

Adjustable HEI Vacuum Advance Canister  for SBC BBC

  • Features: Infinitely adjustable for both the rate and total amount of advance.
  • Benefit: Helps eliminate part-throttle spark knock (pinging) while maximizing fuel efficiency.

A SBC  HEI vacuum advance unit suits virtually any classic vehicle powered by a Small & Big Block Chevrolet V8 (or other GM V8 variants) that uses a standard, non-computer-controlled HEI distributor

How Vacuum Advance Works on an SBC BBC

  • Lean Mixture Tuning: At light throttle or cruising speeds, the engine pulls high intake manifold vacuum. A lean air-fuel mixture burns slower and requires the spark to ignite earlier in the cycle. The vacuum advance provides this extra timing.
  • Efficiency Boost: Running a functional vacuum advance can improve fuel economy by 3 to 4 miles per gallon. It also prevents the engine from running hot during stop-and-go driving or extended idling
  • Wide-Open Throttle Behavior: When you mash the accelerator pedal down, engine vacuum drops to near zero. The vacuum advance unit pulls back, handing total timing over to the distributor's mechanical (centrifugal) advance weights. Therefore, vacuum advance does not alter maximum wide-open throttle power
  • How to Adjust and Tune an HEI Vacuum Advance Canister

Adjustable aftermarket units allow you to fine-tune how early and how much ignition advance is introduced.
  • Locate the Adjustment Port: Insert a 3/32" Allen wrench directly into the vacuum nipple on the tip of the canister
  • Set Initial Benchmark: Disconnect and plug the vacuum advance hose at the source before setting your initial and total mechanical timing
  • Dialing In: Reconnect the vacuum advance hose. Turn the hex screw clockwise to increase the rate of advance, or counter-clockwise if you experience part-throttle spark knock (pinging)
  • Road Testing: Test the car under normal driving conditions. If the engine begins to rattle or ping during light acceleration, back the adjustment off counter-clockwise 1 to 2 turns until the noise completely disappears

Important Fitment Exceptions

While it fits almost all standard HEI distributors, it will not suit the following setups:
  • Computer-Controlled HEI (Late '80s/Early '90s): Vehicles with GM's early "Computer Command Control" (CCC) electronic fuel injection systems do not use a vacuum advance canister at all. The vehicle's computer controls the ignition timing electronically via sensors.
  • Points Distributors: Will not fit vintage, pre-1974 distributors that use mechanical points and a smaller, distinct type of vacuum canister
View full details